DataCard CP60 Guide d'installation télécharger pdf (Page 71)

Page 66

DM-00760 Duplex Error

The duplex mechanism did not reach the correct

position.

Possible Cause 1: A card or object is jammed in or near the duplex unit.

Solution 1: Open the duplex module cover at the back of the printer (1).

Release any cards or objects stuck in the module (2). Make sure that the

duplex mechanism can move freely in the direction shown (3).

Possible Cause 2: The rollers in the duplex mechanism are dirty.

Solution 2: Run a printer cleaning card, and then clean the printer rollers

including the duplex module rollers.

If you cannot fix the problem, contact your service representative for

assistance.

Pas de commentaire

DataCard CP60 Guide d'installation Page 71