DataCard CP60 Guide d'installation télécharger pdf (Page 108)

Page 103

PR-01718 Printhead Temp

The printhead temperature is too high.

Possible Cause: The printer detects a temporary heat buildup while

printing.

Solution: The card in process was printed. Wait a few minutes to allow the

printer to cool down.

If the message occurs often:

• Clear any items around the printer and make sure that air can circulate

around the printer.

• If the printer is operating in an environment above 95° F (35° C) for a

short time, power off the printer and resume printing when the

temperature reaches 95° F (35° C) or lower.

• If the printer often operates in an environment above 95° F (35° C),

power off and disconnect the printer. Move the printer, PC, and any other

equipment (such as a camera) to an environment with a temperature

consistently at or below 95° F (35° C).

If you cannot fix the problem, contact your service provider for assistance.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 133 134

Pas de commentaire

DataCard CP60 Guide d'installation Page 108