DataCard CP60 Guide d'installation télécharger pdf (Page 94)

Page 89

MS-01424 Mag Stripe Error

Unable to read any data from the card.

Possible Cause 1: The cards in the input hopper do not have a magnetic

stripe.

Solution 1: Load magnetic stripe cards in the input hopper.

Possible Cause 2: The magnetic stripe cards in the input hopper are not

oriented correctly.

Solution 2: Load magnetic stripe cards correctly in the input hopper.

Possible Cause 3: The magnetic stripe on the card is High Coercivity

material and the printer is set to Low Coercivity.

Solution 3: To use the cards you have, set the printer to use High Coercivity

(using Printer Diagnostics). To encode with Low Coercivity, obtain Low

Coercivity cards. Make sure the cards work with your magnetic stripe reader.

Tips for success:

• If the magnetic stripe card does not have stripe material to match the

tracks sent, this message can appear. For example, this message

appears if you use a two-track card and send three tracks of magnetic

stripe data.

Magnetic stripe

Sm ar t Car d c h ip

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 133 134

Pas de commentaire

DataCard CP60 Guide d'installation Page 94