DataCard CP60 Guide d'installation télécharger pdf (Page 104)

Page 99

PR-01705, PR-01706 Card Jam

The card is stuck or lost in the printer.

Possible Cause: The card is stuck in the print area.

Solution: Release the card so it can move.

1 Open the top cover of the printer.

2 Remove the ribbon cartridge.

3 Locate the card inside the print area. The card might be stuck near the

cleaning roller, the printhead, near the optional magnetic stripe or smart

card module, or at the end of the card track.

4 Turn the Manual Advance Knob to move the card.

5 If needed, grasp an end of the card and pull to remove the card.

6 Replace the ribbon cartridge and close the printer cover.

7 to clear the printer.

Tips for success:

• If the print ribbon is torn, fix the print ribbon.

• If the printer picks two cards, fan cards before loading the input hopper.

• If you are printing on StickiCard™ adhesive-backed plastic cards, this

message can appear. For best results, clean the printer more often,

such as after every 100 cards that are printed.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 133 134

Pas de commentaire

DataCard CP60 Guide d'installation Page 104