DataCard CP60 Guide d'installation télécharger pdf (Page 64)

Page 59

Set the K Power

Tips for Success

• Set the K Power value to change the darkness—or intensity—of printing with monochrome ribbon (or the

monochrome–K–panel of full-color ribbon). K power affects the thickness of letters and barcodes; higher

intensity prints thicker letters or barcodes.

• A value of “0” for K Power means no change to the factory setting for K power.

• Make small changes in K power and then print a card to view the result. If needed, return to these steps to

make additional changes.

• If you print barcodes, make sure the new setting results in barcodes that can be read by readers at your site.

1 With “Configuration” displayed on line 1, press the Up or Down Arrow key if

needed to display “K Power” on line 2.

2 Press the Enter key to display the current value.

3 Press the Up or Down Arrow key to change the K Power setting. (Press and hold

the Up or Down Arrow key to change the value quickly.) If you press the down

arrow key so the value is less than zero (0), a minus (-) sign appears. A plus (+)

sign indicates a value greater than zero (0).

4 When the K Power reaches the level you want, press the Enter key to return to the

Configuration menu.

5 Press the Up or Down Arrow key if needed to scroll to “Exit” on line 2.

6 To print cards, press the Enter key repeatedly to return to the “Printer Ready” display.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 133 134

Pas de commentaire

DataCard CP60 Guide d'installation Page 64