DataCard CP60 Guide d'installation télécharger pdf (Page 92)

Page 87

MS-01417, MS-01418, MS-01419, MS-01420, MS-01421

Card Jam

A card was stuck when attempting to read or write

magnetic stripe data on the card.

Possible Cause 1: The card is stuck in or near the magnetic stripe module.

Solution 1a: Remove the stuck card. Send the card to print again.

Solution 1b: Make sure cards are free of dirt or oil.

Solution 1c: If the message appears again, run a cleaning card, change the

cleaning sleeve, and then clean the rollers in the printer.

If you cannot fix the problem, contact your service provider for assistance.

Pas de commentaire

DataCard CP60 Guide d'installation Page 92