DataCard CP60 Guide d'installation télécharger pdf (Page 27)

Page 22

Site requirements

Operating environment

• Relative humidity: 20% to 80% non-condensing

• Temperature: 60° F to 95° F (15° C to 35° C)

Electrical requirements

• The power supply is rated at 100-240 VAC, 50-60

Hz, 1.8 amp. (It adjusts to any power within this

range.)

• Single phase, 3-wire, grounded receptacle only.

Physical requirements

• The printer weighs less than 11.5 pounds (5.3 kg).

The weight depends on the supplies and options

installed.

• Printer dimensions are 21.5 inches (546 mm) long, and 7.8 inches (198 mm) wide. The 100-card input hopper

is 9.5 inches (241 mm) high and the 200-card hopper is 11.9 inches (302 mm) high.

• The clearances required are 1 inch (25 mm) at the back, 2 inches (51 mm) on the left side, and 10.5 inches

(267 mm) above the printer latch to open the cover.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 133 134

Pas de commentaire

DataCard CP60 Guide d'installation Page 27