DataCard CP60 Guide d'installation télécharger pdf (Page 114)

Page 109

PR-01724 Ribbon Break

The print ribbon is broken.

Possible Cause 1: The print ribbon has broken or is not installed.

Solution 1: Trim the broken ribbon evenly and tape the cut end of the ribbon

to the ribbon on the take-up spool. Install the ribbon cartridge.

NOTE: Do not switch take-up spools when fixing.

Possible Cause 2: If the ribbon type is K or KT, the print ribbon is at the end

of the roll.

Solution 2: Load a new roll of monochrome print ribbon.

Possible Cause 3: The transparent wheel of the print ribbon cardtridge is

not in the correct position.

Solution 3: Load the print ribbon cartridge with the transparent wheel in the

slot. If it does not go in easily, it is damaged; obtain a new print ribbon cartridge.

Technical issues:

• If you have recently changed edge-to-edge settings using the driver,

printing might be too close to the edge of the card. Change edge to edge

settings.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 133 134

Pas de commentaire

DataCard CP60 Guide d'installation Page 114