DataCard CP60 Guide d'installation télécharger pdf (Page 37)

Page 32

— If you choose Static IP, the second line of the LCD panel

shows “IP Address.”

— Work with your network personnel to obtain the IP

address, subnet mask, and gateway address. Enter

these as described next.

— Press the Enter key to choose “IP Address.” The printer

shows the current IP address and a cursor appears

under the first byte of the address. (The address byte

shows 3 digits when it can be changed and the cursor

appears under the right-most digit.)

— Press the Up or Down Arrow key to change the address.

(Press and hold the Up or Down Arrow key to change

the value quickly.)

— When the first byte is correct, press the Enter key to

move to the second byte.

— Repeat for the third and fourth byte of the IP address.

When you press the Enter key after the fourth byte of the

address, “Subnet Mask” appears on the second line of

the LCD panel.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 133 134

Pas de commentaire

DataCard CP60 Guide d'installation Page 37