DataCard LM200 Guide de l'utilisateur Page 81
- Page / 109
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
SR200 & SR300 Printer and LM200 & LM300 Laminator User Guide 75
Retransfer section jam
If a card jams in the retransfer section, “Jam (Retransfer)” is displayed on the
LCD panel. To remove the jammed card:
1 Power off the printer.
2 Open the printer door.
3 Press the retransfer film cartridge eject button and remove the
retransfer film cartridge.
The card might be stuck to the film. Watch
carefully to avoid jamming the card when
removing the retransfer film cartridge.
If “Please Close Door” appears, the retransfer
film cartridge is stuck. Push it back into the
printer, close the door, and return to step 3.
4 Remove the card from the printer or from the
retransfer film cartridge.
5 If the card is stuck to the right of the heat roller,
see “Transfer jam” on page 73.
6 If the card is stuck near the
Retransfer heat roller, use the
supplied tweezers to remove the
card, as shown.
7 Replace the retransfer film
cartridge and close the printer
door.
8 Power on the printer.
9 Press Reset. “Card Jam
Removed?” appears on the
printer LCD panel.
Do not initialize the printer with
the card inside.
— Press Yes only if the card is
removed.
— Press No if the card remains
inside the printer.
10 Initialize the supplies as
described in “Initialize the ink ribbon and retransfer film” on page 17.
Tips – Retransfer jam
• Some internal parts may
be hot. Be careful when
removing a jammed card.
• The card might be very
hot. Use the supplied
tweezers to remove
cards from the printer.
• Do not drop the card
inside the printer.
- User Guide 1
- Trademark acknowledgments 2
- Proprietary Notice 2
- Contents 3
- 5 Messages 5
- Liability statement 6
- Introduction 7
- About the printer 8
- The inside of the printer 9
- The back of the printer 10
- About the laminator 11
- Using the printer 13
- Load Supplies 14
- Remove Hopper and Cards 15
- Replace the Hopper 15
- Adjust Card Thickness 15
- Load ink ribbon 16
- Load retransfer film 17
- Load top side laminate film 18
- Take-up Spool 19
- Supply Roll 19
- Guide Shaft 19
- Metal Guides 19
- Power on 20
- Optional laminator connection 21
- Power on the laminator 21
- Power on the printer 22
- Prepare to print cards 23
- Printing cards 23
- Print cards using ID software 24
- Print from a PC application 24
- Tips for Success 25
- Viewing and changing 27
- Printing Preferences 28
- Print tab 29
- Priority of Data 31
- 1 Panel Auto 2 Panels 31
- Page Split 32
- Security Erase 33
- Printing Area Settings 34
- Printer Settings 34
- Encode tab 35
- Laminate tab 35
- Configuration tab 35
- Printing Properties 36
- Status Monitor 37
- Close the Status Monitor 38
- Printer Status tab 39
- Printer Setting tab 40
- Retransfer tab 41
- Bend Remedy tab 42
- Media Setting tab 42
- Property tab 43
- Laminator tab 44
- Printer Select tab 45
- Others tab 46
- Security Lock tab 46
- Status monitor messages 47
- “Mending 49
- Using the LCD Menus 55
- Using the Printer LCD Panel 57
- Printer Security Number 63
- Red Status Light 64
- Blue Status Light 64
- Operator Button 64
- “Laminator 65
- LCD messages” on page 84 65
- Laminator Settings 66
- Taking care of your printer 67
- Cleaning the printer 68
- Tips – Cleaning card feed 69
- Cleaning the magnetic head 70
- Cleaning the thermal head 71
- Cleaning printer fan filters 71
- Cleaning the laminator 73
- Laminator fan filter 75
- Messages 77
- Printer error recovery 78
- Transfer jam 79
- Turnover jam 80
- Retransfer section jam 81
- Printer LCD messages 83
- “Operating environment” on 85
- “Load cards” on 85
- Take -up side 86
- Laminate pressure motor 86
- Supply side 86
- Supp ly Roll 87
- Patch Position 88
- Card warping 89
- Laminator LCD messages 90
- Supplies 93
- Ink ribbon 94
- Retransfer film 94
- Laminator material 95
- Cleaning supplies 96
- Site requirements 97
- Site guidelines 98
- Ventilation clearance 99
- Printer specifications 100
- Laminator specifications 101
- Magnetic Stripe Encoding 103
- Inline Encoding 104
- Character Code Table 105
- Compliance (FCC) 107
- Regulatory compliance 108
- 11111 Bren Road West 109
- Minnetonka, MN 55343-9015 109
- 952.933.1223 109
- 952.933.7971 FAX 109
© 2020, manymanuals.fr. Tous droits réservés | 0.800 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels