SR200 & SR300 Printer and LM200 & LM300 Laminator User Guide 69
Cleaning the laminator cartridge
The laminator cartridge(s) can collect debris and dust during lamination and
supply loading. Clean the cartridge(s) every 1,000 cards.
1 Open the laminator door by pulling the top of the door toward you.
2 Press and hold down the cartridge release button and pull out the film
cartridge.
3 Remove the laminate film from the film cartridge.
4 Clean the four metal guides with a lint free cloth and isopropanol.
5 Replace the supply and take-up spools on the cartridge. See “Load top
side laminate film” on page 12.
6 Replace the loaded laminator cartridge in the laminator until it clicks in
position.
7 Close the laminator door.
Laminator fan filter
The laminator fan filter is designed to keep
airborne particles from entering the unit.
Clean the filter regularly and replace it when
the foam begins to deteriorate.
1 Remove the filter from the back of the
laminator by pulling the filter cover off.
2 Clean the filter carefully using a
vacuum cleaner. Hold the foam filter in
place to prevent it from being drawn
into the vacuum.
3 Reinstall the filter.
Commentaires sur ces manuels