DataCard LM200 Guide de l'utilisateur télécharger pdf (Page 29)

SR200 & SR300 Printer and LM200 & LM300 Laminator User Guide 23

Print tab

The Print tab contains settings for using the color

(YMC), black (K) panels and additional panels of

the print ribbon. The tab also contains controls for

color adjustment, setting up a look-up table, setting

up page split and dithering. See “Page Split” on

page 26 for more information.

To print text, bar codes, or both using K ink on the

side of a card using ink ribbon with YMCK panels,

choose Extraction>Only Text. To print black areas

of graphics with K ink ribbon, choose

Extraction>All. If you print graphics with black (K)

ink, you can set the darkness of Dithering by clicking the Dither... button.

If your printer includes a turn-over unit for two-sided printing, you can specify whether to

print on both sides. For each side, you can choose the ribbon panels to use and whether to

rotate the image (your ID software might specify these settings, which override the Print

tab). Choose ribbon panels such as peel-off or UV only if the ribbon includes them and

your ID software sends data for them. (Sending data for panels that are not present causes

errors.)

Use the Printing area settings to block printer, or if using peel-off ribbon. Use the UV Ink

settings if you use print ribbon with a UV panel.

Look Up Table

The lookup table adjusts printing by substituting

one color for another. It is sent to the printer, where

the values are used as the card is printed.

The look up table requires a file with a full set of 256

values (0-255) for each plane, in order, for Yellow,

Magenta, Cyan, and Black (1024 values). Each

field can have a value from 0 through 255. Data

should be ASCII numeric values, separated by a

comma or line feed.

Color Adjustment

Use the Color dialog to adjust your images before

sending them to the printer. The settings affect all

parts of a card, including a color logo, color photo,

and color backgrounds.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 108 109

Pas de commentaire

DataCard LM200 Guide de l'utilisateur Page 29