DataCard LM200 Guide de l'utilisateur télécharger pdf (Page 20)

14 SR200 & SR300 Printer and LM200 & LM300 Laminator User Guide

Power on

Check the PC connection

The printer and PC are connected when the printer is set up. To avoid

receiving error messages on the LCD panel, make sure that all supplies are

properly loaded and in position before powering on the printer. Before you

begin processing cards, check the following:

• The card printer door and card hopper are closed securely.

• The USB data cable is securely connected to the printer and the PC.

• The Network data cable is securely connected to the printer and to a

network port.

• The power cable is securely connected to the printer and appropriate

grounded power source.

• The card stacker is attached to the printer or to the optional laminator.

• Make sure cards and all other supplies are loaded. See “Load

Supplies” on page 8 for more information.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 108 109

Pas de commentaire

DataCard LM200 Guide de l'utilisateur Page 20