DataCard LM200 Guide de l'utilisateur télécharger pdf (Page 39)

SR200 & SR300 Printer and LM200 & LM300 Laminator User Guide 33

Printer Status tab

The Status tab shows:

• The type of ink ribbon, the approximate

percentage remaining, and the lot number.

• The type of retransfer film and the

approximate percentage remaining.

• The resettable print count and a Clear button

to set it to zero (0).

• If a laminator is attached, laminator status

appears under the printer status (marked by

the rectangle).

• The printer name. If more than one printer is

installed, choose the printer to work with using

the

Printer Selection Name list. Click the

Update button to search for additional SR200

& SR300 printers. The information changes

automatically when you choose another printer. Only printers on the same subnet

as the PC can be found.

• Enough is displayed when cards are present in the hopper. None is displayed

when no cards are present.

• If the printer is processing a job, the name of the document and the name of the

user appears in the Document Information area.

• When the printer requires cleaning, the printer image changes to:

• The current state of the printer, such as ready. The icon changes

with different states. See the table below.

Icon Status Icon Color Meaning

No Printer is found. Yellow The printer power is not switched on. or the host PC and

printer are not connected correctly.

Ready Green The printer is ready and able to start card printing.

Initializing Yellow The printer is initializing. After the printer is initialized, it

goes into Ready state.

Offline Mode Yellow The printer is in Setting mode or it is being cleaned.

When the process ends, it goes into Ready state.

Preheating Yellow The heat roller is heating. When it reaches the correct

temperature, the printer goes into Ready state.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 108 109

Pas de commentaire

DataCard LM200 Guide de l'utilisateur Page 39