DataCard UltraGrafix Select Manuel d'installation télécharger pdf (Page 93)

Maxsys and MX Series Software Administrator’s Guide 81

3. Add e

lements to the Front (top view) or Back (bottom view) of the virtual

card. Drag an element from the element list (the columns of icons on the left

side of the window) to the card. Some elements can be placed directly on the

card, while others will go to the docking column on the right side of the card.

Those elements that are placed directly on the virtual card can be moved

to the approximate location of the finished product; since this is not a

true WYSIWYG interface, do not rely on the placement for card design.

Rather, the element properties' Settings tab contains fields where the X

and Y coordinates can be defined.

Your hardware configuration may not match all available elements.

Ensure that the modules on your system match the elements that you

will be using in the Card Setup.

4. Define the Card Properties as required. (For more information, refer to

“Defining Card Properties” on page 83.)

5. Se

t the properties for each element (if required).

• Click the element icon on the virtual card, or click Element List and then

select an element. The Properties view for that element appears on the

right side of the window.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 321 322

Pas de commentaire

DataCard UltraGrafix Select Manuel d'installation Page 93