DataCard UltraGrafix Select Manuel d'installation télécharger pdf (Page 232)

220 Miscellaneous Configuration

If the password is changed for any reason, (either Local or Domain)

it is necessary to go to Services and then change the password “Log

On” to the new password for each of the above services.

User Configuration

A user to the system does not need to be in the Local (or Domain) Administrators

group. They can be placed in a group that has limited access rights to the system.

Depending on what the user will be doing, (production only, card designing,

diagnostic capabilities) the logged-in user will need read and possibly write

privileges to the following local directories:

• C

:\MX6000\Diagnostics

• C

:\MX6000\Cfg

• C:\MX6000\Config

• C

:\MX6000\FlashUpdates

• C

:\MX6000\VPDUpdates

• C:\MX6000\Backup

The logged-in user will also need read and

possibly write privileges to directories

on the network that store data, setups, or audit files.

Because it is difficult to predict changes in

software, and specific files, Datacard

strongly recommends the logged-on user have read and write privileges to the

entire MX6000, MX2000, or Maxsys directory, and also be a member of the DB2

users group.

Audit Settings

If you need to change the time or date format, log on as the user that starts the

Maxsys Service, and then use Control Panel | Regional and Language Options

to set the options.

1 2 ... 227 228 229 230 231 232 233 234 235 236 237 ... 321 322

Pas de commentaire

DataCard UltraGrafix Select Manuel d'installation Page 232