DataCard UltraGrafix Select Manuel d'installation télécharger pdf (Page 188)

176 Stocks

Retransfer Stock Set CMYK_Gold

Ribbon Stocks Tab

Parameter Description

Stock Name Unique, descriptive name of the stock

Description A description of the stock

Define Ribbons Select/enable the print head position (up to five)

and then choose a corresponding ribbon stock

from the Stock Name list.

Retransfer Material Choose a retransfer material stock from the list.

Primer Choose a primer material stock from the list.

Print Processes Tab

Parameter Description

Add Print Process Select a process type and then click Add to

create a new Print Process to associate with the

Retransfer Stock set. Enter the process name in the

text box and then select the ribbon(s) that will be

used (Gold Spot). Click Save when finished. To

remove a process select the process and then

click Remove.

Notes: If a high density ribbon is defined in the fifth

mount point, and a one color print process is

defined using the high density ribbon, a Y offset

box will open. The Y offset origin is the bottom

edge of the printed canvas of the retransfer

material. This is slightly larger than the card. In

Card Setup, this is the dashed area around the

card when Retransfer Print Technology is selected.

This value ranges from 0 to 1.12" with a precision

up to ten thousandth of an inch. The default is

0.56".

1 2 ... 183 184 185 186 187 188 189 190 191 192 193 ... 321 322

Pas de commentaire

DataCard UltraGrafix Select Manuel d'installation Page 188