DataCard SP75 Plus Guide d'installation télécharger pdf (Page 77)

Page 72

MS-01407, MS-01408, or MS-01409 Mag Stripe Error

LRC error reading data on track 1, 2, or 3.

What is LRC?

• LRC is special data used when encoding a magnetic stripe. It is not the

data you enter.

Possible Cause 1: The card has dirt or damage on the magnetic stripe.

Solution 1: Send the card to print again. If the message appears a second

time, run a printer cleaning card.

Possible Cause 2: The magnetic stripe on the card is Low Coercivity

material and the High Coercivity setting is selected.

Solution 2: To use the cards you have, select the Low Coercivity setting (in

Diagnostics). To encode with High Coercivity, obtain High Coercivity cards.

Make sure the cards work with your magnetic stripe reader.

If you cannot fix the problem, contact your service provider for assistance.

Pas de commentaire

DataCard SP75 Plus Guide d'installation Page 77