DataCard SP75 Plus Guide d'installation télécharger pdf (Page 14)

Page 9

Loading laminator supply material

If your printer has locks, unlock and lift the top cover to release the laminator cartridge(s).

1 Remove the laminator cartridge from the printer.

Change the supply in one laminator at a time.

2 Open the gate on the laminator cartridge (1).

3 Remove both used spools (2) from the cartridge (if present).

4 Remove the new supply material from the packaging.

5 Load the new roll of laminator supply material in the cartridge.

— Put the full spool on the supply spindle of the cartridge (A). Push until

the spool clicks onto the spindle.

— Put the empty take-up spool on the spindle with the solid black gear

(B). Push until the spool clicks onto the spindle.

— Turn the take-up spool to remove slack from the material.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 135 136

Pas de commentaire

DataCard SP75 Plus Guide d'installation Page 14