DataCard SP75 Plus Guide d'installation télécharger pdf (Page 112)

Page 107

PR-01705, PR-01706 Card Jam

The card is stuck or lost in the printer.

Possible Cause: The card is stuck in the print area.

Solution: Release the card so it can move.

1 Open the top cover of the printer.

2 Remove the ribbon cartridge.

3 Locate the card inside the print area. The card might be stuck near the

cleaning roller, the printhead, near the optional magnetic stripe or smart

card module, or at the end of the card track.

4 Turn the Manual Advance Knob to move the card.

5 If needed, grasp an end of the card and pull to remove the card.

6 Replace the ribbon cartridge and close the printer cover.

7 Press the Ready key to clear the printer.

Tips for success:

• If the print ribbon is torn, fix the print ribbon.

• If the printer picks two cards, fan cards before loading the input hopper.

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 135 136

Pas de commentaire

DataCard SP75 Plus Guide d'installation Page 112