DataCard UltraGrafix Magna Guide de l'utilisateur Page 110
- Page / 159
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
6-8
Troubleshooting
#
Obtain guidance from service before performing this task.
User’s Guide for the Magna™ Class Printer
Topcoat applied using the print ribbon
You might apply topcoat to the card using a T panel as part of the
print ribbon. Use this table to address problems you see with topcoat.
The card shows irregular
lighter or darker spots.
The print ribbon is
wrinkling because the
intensity setting is too
high.
The printhead is not
aligned correctly.
Lower the printhead
intensity setting for color
printing. See Chapter 5.
#
Contact your service
representative.
Table 6-1: Print quality problems
What you see Possible causes Solutions
Table 6-2: Topcoat quality problems—print ribbon
What you see Possible causes Solutions
Random scratches appear
in the topcoat of the
printed card.
The inside of the printer
might be dirty.
Supplies were
mishandled.
Run a printer cleaning
card and a duplex/overlay
cleaning card. See
Chapter 4.
Store supplies in a clean
environment. Keep
supplies in their packaging
until loaded in the
cartridge.
MagnaUserGuide.book Page 8 Friday, May 5, 2000 1:09 PM
- ImageCard® and 1
- UltraGrafix™ Series 1
- User’s Guide for the 1
- Magna™ Class Printer 1
- Regulatory compliance 2
- Trademark acknowledgments 2
- Proprietary Notice 2
- Contents 3
- Declaration of conformity 7
- Overview 9
- About this manual 10
- Audience 10
- About the Magna Class printer 10
- Printer models 11
- Printer features 13
- Inside the printer 15
- Back of the printer 17
- Getting started 20
- Selecting the site 21
- Environmental requirements 23
- Unpacking the printer 24
- Who to call for assistance 28
- Connecting the printer 28
- Loading cards 30
- Magnetic Stripes 32
- Loading the print ribbon 33
- Load the print ribbon 34
- Ribbon take-up 35
- Ribbon supply 35
- Print ribbon supply 35
- Loading the overlay material 36
- Load overlay in the cartridge 37
- Take-up spool 38
- Supply roll 38
- Replace the overlay cartridge 39
- Verify the debower position 40
- Set the debower 41
- Powering on the system 42
- Power on the printer 43
- Installing the printer driver 44
- Install the printer driver 45
- Setup tips 47
- Make a Printer test card 48
- Printer test card 50
- Print the Windows test page 51
- Microsoft 52
- Using the printer 53
- Use the Properties dialog box 54
- Using the Status Monitor 59
- Open the Status dialog box 60
- Exiting the Status Monitor 61
- Making cards 63
- Removing cards 65
- Responding to messages 66
- Fix a printer problem 67
- Shutting down the system 68
- Maintaining the printer 70
- Cleaning the printhead 75
- Cleaning the supply tracker 76
- Clean the supply tracker 77
- Clean the heated roller 78
- Advanced Information 83
- Reinstall the printer driver 85
- Network printing 89
- Printer and PC setup 90
- Change the print ribbon 95
- Change the card design 96
- Two-step printing process 97
- Change the printhead 98
- Change printhead settings 98
- Print sample cards 99
- When to change what 99
- Changing operational settings 100
- Troubleshooting 103
- Problems with card appearance 104
- Print station 105
- Optional overlay station 113
- Obtaining service 117
- When to obtain service 118
- Safety and compliance 121
- Liability statement 122
- Acknowledgments 123
- Supplies and cards 124
- Overlay material 127
- Supply roll storage 128
- Card specifications 128
- Card size 129
- Card material 129
- Pre-punched cards 130
- New cards preferred 130
- Card quality guidelines 130
- Card storage specifications 131
- Cleaning supplies 132
- Printer driver CD-ROM 133
- Anti-static wrist strap 133
- Printer components 134
- Interface cable 135
- Power cord 135
- Smart card serial cable 136
- Print ribbon cartridge 136
- Card cartridge 137
- Card output stacker 137
- Overlay cartridge 138
- Related publications 139
- PC settings 140
- Setting port values 143
- Setting printer permissions 144
- PC settings for Windows 98 146
- Verify communication mode 148
- Magnetic stripe 151
- NTT character set 152
- Magna Class printer 153
Produits connexes et manuels pour Imprimer et scanner DataCard UltraGrafix Magna
(34 pages)
Imprimer et scanner DataCard SP55 Spécifications
(134 pages)
(134 pages)
© 2020, manymanuals.fr. Tous droits réservés | 0.084 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels