DataCard SP75 Plus Guide d'installation télécharger pdf (Page 37)

Installation on Windows

Installation Guide 34

5 Power on the wireless print server. The

power light on the print server will be on.

— For best results, try to set up the print

server without connecting the printer.

If the wireless network adapter utility

does not find the print server, you

might need to connect the print server

to the printer.

6 Insert the wireless print server CD in the

PC with the wireless network adapter.

Follow the instructions provided with the

print server to set it up.

Record the values you use so you can

repeat the setup for other devices and to

finish configuring the connection to the

printer.

7 Network support personnel can

provide the network settings to use.

Set up the print server so it

communicates with the network

through the access point.

8 Connect the print server and printer

using a USB data cable (if it is not already

connected).

You can remove the wireless adapter from the

PC. Future communication will occur over the

network.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 83 84

Pas de commentaire

DataCard SP75 Plus Guide d'installation Page 37