DataCard SP75 Plus Guide d'installation télécharger pdf (Page 14)

Before You Install

Installation Guide 11

5 Install the laminator supply material (if the printer has a laminator).

6 Load cards in the input hopper (if the printer

has a hopper).

Do not connect the printer and PC at this

time.

7 Power on the PC or host computer. Make

sure it is fully operational before connecting

the printer.

8 For a printer connected using the built-in

Ethernet port on the printer, connect the

network cable to the printer and to the

network now.

For a printer connected using a USB cable

or a print server, continue with step 9.

9 Power on the printer.

a Connect the power supply to the

printer.

b Connect the power cable to the power

supply.

c Connect the power cable to a facility

power source.

d For printers with laminators,

push the power switch to On.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 83 84

Pas de commentaire

DataCard SP75 Plus Guide d'installation Page 14