DataCard ImageCard Select Guide de l'utilisateur télécharger pdf (Page 19)

Using the printer 2-3

User’s Guide for ImageCard® Select™ and UltraGrafix® Select™ Printers

For magnetic stripe cards, the magnetic stripe faces down and is positioned

toward the side of the printer that opens (see Figure 2-3). (For some custom

applications, you might receive instructions to place cards in a different

orientation.)

For smart cards, position the card so the chip is up and toward open end of the

card cartridge.

Figure 2-3: Load cards into the card cartridge

4 Replace the card cartridge in the cavity (step 1 in Figure 2-4). Push the bottom of

the card cartridge toward the printer until it clicks into place (step 2 in Figure 2-4).

Figure 2-4: Replace the card cartridge

If the printer has a locking card cartridge, lock the cartridge after replacing it.

♦

Magnetic Stripe

Smart Card Chip

iSEL007u

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 153 154

Pas de commentaire

DataCard ImageCard Select Guide de l'utilisateur Page 19