DataCard RP90 Plus Manuel d'installation télécharger pdf (Page 5)

2 Installing the Printer

Unpacking the RP90 Plus E Printer

Remove the RP90 Plus E card printer from the shipping carton. Remove all packing tape from

inside and around the printer. Remove the protective cushion that protects the printhead.

Unpacking the Optional RL90 Laminator

If this option is purchased, remove the optional RL90 Laminator from the shipping container.

Make sure to remove all packing tape inside and around the laminator. Remove the protective

cushion that protects both the heated roller and the platen roller.

Unpacking other options

The printer can have a smart card module installed in the field. For best results, set up the

printer and verify that it operates, and then install the optional smart card module.

Installing the Printer

Choosing a Location

The location of installation affects the performance of the RP90 Plus E and the optional RL90

Laminator. Install them in a location that meets the following criteria.

• Use the card printer in locations with the cleanness Class 8 or better of

ISO14611-1. Using the card printer in dusty locations may cause print blurring

and printhead malfunctions. Turn the power off whenever no printing

operation is required. Leaving power on for long periods without printing may

cause fine dust to collect inside the printer, causing print blurring and dust to

adhere to cards.

• Avoid locations susceptible to strong vibration or shock.

• Avoid locations exposed to direct sunlight.

• Avoid locations where there is a possibility of metal objects or other foreign

material entering the unit.

• Avoid areas near walls with little ventilation.

Caution: The RP90 Plus E Card Printer weighs approximately 49 pounds

(22kg). Use care when removing the printer from the shipping container.

Note: Save the shipping carton and packaging materials. They are required if

you need to store, move or return the printer for service. Replacements are not

available.

Caution: The RL90 Laminator weighs approximately 17 pounds (8kg). Use

care when removing the laminator from the shipping container.

Note: Save the shipping carton and packaging materials. They are required if

you need to return the laminator for service. Replacements are not available.

1 2 3 4 5 6 7 8 9 10 ... 47 48

Pas de commentaire

DataCard RP90 Plus Manuel d'installation Page 5