DataCard SD Series Guide de l'utilisateur télécharger pdf (Page 46)

36 System Maintenance

Prepare the Printer for Use

1. Unlocktheprinterandopenthemulti‐hopperdoor.

2. Removetheusedcleaningcardsfromthehoppers.

3. Replacetheunprintedcardsintheinputhoppers.

4. Opentheprintersuppliesaccessdoorand

theprintercover.Removetheprintribbon

cartridge.

5. Installanewcleaningsleeveontheribbon

cartridgeandremovetheprotectivecover.

Referto“LoadtheCleaningSleeve ”on

pag e 20forthestepstofollow.

6. Replacetheribboncartridgeandclosethe

printercoverandtheprintersupplies

accessdoor.

7. Opentherejectcardtrayandremovetheusedcleaningcard.

8. Locktheprinter.

TheprinterreturnstoReadyandisavailabletoprintcardsagain.



9. Discardtheusedcleaningcardsandcleaningsleeve.

HINTS&TIPS

• Usethecleaningcardsandcleaningsleeveonetimeonly.

• Changethecleaningsleeveeachtimeyoucleantheprinterorchangethe

printribbon.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 77 78

Pas de commentaire

DataCard SD Series Guide de l'utilisateur Page 46