DataCard LM200 Guide d'installation télécharger pdf (Page 22)

14 Installing the Hardware Components

3. IfyoursystemincludesanLM200orLM300laminator,plugtheprovidedpowercordintothe

backofthelaminator.

4. Plugthepowercord(s)intothefacilitypowersource.

5. Ifthisisthefirsttimeyouareusingtheprinter,powerontheprinterandlaminatorwithout

installingsupplies.Keepthepoweronforabout 30seconds,untilaninkerrororafilmerror

occurs,thenpoweroff.

(Theprinter

andoptionallaminatorareshippedintransportmode.Inkribbonandretransfer

material,andlaminatormaterialcannotbeinstalledintransportmode.Poweroncancels

transportmodeandallowssuppliestobeinstalled.)

Connecting the Data Cable

ConnecttheUSBornetworkdatacableonlywhentheprinterdriverinstallationinstructionstell

youtodosoinChapter4orChapter6.

Iftheprinterhasbeenusedpreviously,thetypeofconnectiondisplaysontheprinterLCDpanel

whentheprinterispoweredon:

 TheUSBsymbolis:

 Thenetwork(LAN)symbolis:

ThedefaulttypeofconnectionisNetwork.Tosetotherconnectionvalues,referto“Settingthe

UnitNumber,PrinterName,andConnection”onpage 59.

For best results, connect only one data cable to the printer and PC before powering on the

printer.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 93 94

Pas de commentaire

DataCard LM200 Guide d'installation Page 22